How to install the double cap metal snap button
Release time:
2022-12-26 14:12
Source:
Snap buttons are also known as concealed buttons, snap buttons, snap buttons, etc., and they are called differently in different regions. The snap button is a kind of button composed of parts and snap buttons, mainly by virtue of the combination of S-shaped springs. Part A of the snap button is called a female button, and various patterns can be engraved on its side. There is a hole in the middle of the female button, and there are two parallel symmetrical springs on the upper side of the hole, which are mainly fixed by combining it with the male button. Clothing; piece B is called a male buckle, the middle part of which is a protruding cylinder. After the cylinder is pressed into the hole of the female buckle, the spring will generate an opening and closing force to clamp the cylinder to achieve the effect of fixing the clothes.
1. First observe the components of the concealed button. The four-button button first divides the four sets of buttons into different types
2. Install the buckle surface and punch holes on the leather surface with a 3.5MM punch
3. Put the buckle on the base
4. Install another matching part
5. Use the protruding installation tool in the installation tool set to install, pay attention not to press the thin spring wire in the button at the flat position, otherwise the whole one will be scrapped
6. Align the mold with the button and install it. Hit it with a hammer, pay attention to it, and it is best to put it in place at one time
The double-cap metal snaps are easily damaged after being used for a long time, and need to be replaced at this time. Here's how to replace the old-fashioned snap button: Use scissors to remove the thread on the side of the snap button. Then put the new snap button in its original place and fix it with needle and thread.
Related News
